One side of a piece of rough agate may show circles, while the opposite side shows wavy lines. It’s like looking at a layered material in cross-section and then cutting along its length. Much of what makes an agate attractive comes down to where the cutter makes the cut.
How do the layers form?
Banded agate is a form of chalcedony, a finely crystalline form of silica. Its layers may build up in stages inside rock cavities. Differences in translucency and colour make the boundaries visible after polishing. Very thin layers can sit alongside a broad, distinct band. The result depends on the shape of the cavity and how the material grew inside it.
What do you see on the face of a ring?
Closely spaced lines create a detailed face. A broad band can be easier to see from a distance. If the stone has a high dome, a layer may continue down the side and reveal a different pattern when you turn the ring. Compare photos from two angles before choosing a stone for its pattern.
| DetailWhat to look for | |
| Arcs or rings | Are they centred on the face or closer to the edge? |
| A line between two shades | Is it clear in moderate light? |
| A subtle colour transition | Indirect daylight can reveal it better than a strong flash. |
Pattern and origin
Banding describes the stone’s appearance. If a particular origin affects the price, ask what supports the claim. Ask about dye if it matters to you whether the colour has been enhanced. Neither question can be settled by the pattern in a photo.
Can two rings have the same pattern?
Stones from the same rough can look similar. The position and direction of the cut, along with the thickness of the dome, change the details you see.
References
Related products from Amberia
red Yemeni agate ring · Nishapur turquoise ring · classic Yemeni agate ring
Read more: ring size guide · reading a gemstone report · all rings
Full guide: Ring buying guide