How gemstones are mined depends first on where they’re found. Is the material enclosed in solid rock, or has it reached a bed of gravel and sand? That determines how it is recovered and what needs to stay intact during sorting.
Recovering rough from rock
When a gemstone occurs in a vein or layer, workers remove some of the surrounding rock to reach the gemstone-bearing area. This may happen at the surface or underground, depending on the deposit and site conditions. Promising pieces are separated and examined. A coloured section can look large, but a crack through the middle may lead a cutter to plan several smaller stones.
Recovering rough from gravel
In loose deposits, gravel is screened by size. Washing can separate clay from the grains so they can be examined. At some sites, differences in density are used to concentrate certain minerals before the final sort. One batch can contain several minerals, so identification is a separate step from extraction.
| StageWhat workers look for | |
| Collecting the rough | The layer or rock likely to contain gemstones. |
| Initial sorting | Promising material separated from surrounding rock or sediment. |
| Assessing each piece | The size of the intact area, possible face colour and cracks. |
| Deciding how to use it | A stone for a ring, beads or a display specimen, depending on the rough. |
Distinguish a mine’s story from the details of a particular stone
Mine photos show where extraction takes place. To connect a specific gem to those photos, ask about batch traceability or documentation linking the rough to the polished stone. When shopping, start with photos and dimensions of the actual stone and see how it is set. Then check the origin claim if it matters to you.
Does all mined material become jewellery?
Some rough is suitable for ornament or display. Only some pieces have the colour, size and condition needed for the intended cut.