A glossy photo makes a quick impression, but the polish is easier to judge when the viewing angle changes. Alongside the cover photo, ask for an angled image or a short video in which light moves slowly over the stone.
Start with the surface
Change the angle and follow the reflection. A bright line that moves smoothly across the dome helps you see its shape. If a fine line stays fixed as the angle changes, it could be a surface scratch or a feature below the surface. Close-ups from two angles give you a clearer indication than zooming in on one compressed photo.
Check the outline and setting
Look at the stone from above. If it’s meant to be symmetrical, compare the two sides. From the side, check how it sits in the setting, particularly where the edge meets the metal. An asymmetrical cut may follow the colour or pattern of the rough. If there is a noticeable difference from side to side, ask what the jeweller intended.
| Photo or video to requestWhat it shows | |
| Front view in soft light | The stone’s colour and overall pattern. |
| Side view at band level | Dome height and how the stone meets the metal. |
| Slow rotation under fixed light | How the highlight moves and where surface marks appear. |
Ask to see the exact ring on offer
Two stones of the same type can have different patterns. If a particular line or vein is the reason you’re buying the ring, confirm the video shows the piece you’ll receive. Keep the written measurements too, especially if you’re deciding between two sizes.
Does a soft shine indicate poor polishing?
Shine depends on the material, the finish and the light. Look for a consistent surface and a reflection that suits the material.